Newage Industries 2800084-100 Silicone Tube 1/8 Inch Od

Product Description

The NEWAGE INDUSTRIES 2800084-100 is a flexible silicone tube designed for low-pressure fluid transfer in food contact, laboratory, and general industrial applications. With a 1/8 inch outer diameter, 1/16 inch inner diameter, and 1/32 inch wall thickness, this tubing delivers consistent performance across a wide temperature range. Rated to 500 degrees F maximum and 10 psi working pressure, it suits applications where thermal resistance and material compliance matter. The Shore 50A hardness provides good flexibility without excessive collapse under moderate vacuum or flow. Natural color allows visual flow inspection. Licensed plumbers, lab technicians, food processing installers, and industrial maintenance crews are the primary installers.

This silicone tube is suited for food and beverage contact surfaces, laboratory fluid handling, HVAC condensate sensing lines, and light-duty pneumatic or liquid transfer where FDA-compliant materials are required. The natural color and flexible construction make it adaptable to tight routing paths in equipment enclosures or process panels. It is sold in 1-foot increments with a 25-foot minimum cut length and comes on a 100-foot standard coil. This tubing is not intended for high-pressure hydraulic service.

Key Features

• FDA 21 CFR 177.2600 compliant - approved for food contact surface applications
• NSF certified and RoHS compliant
• Rated to 500 degrees F maximum operating temperature
• 10 psi maximum working pressure for light-duty fluid and air transfer
• Shore 50A hardness provides flexible, kink-resistant routing
• Natural color allows visual monitoring of flow

Compatibility

Designed for use with food contact surfaces and general industrial fluid transfer systems requiring FDA 21 CFR 177.2600 and NSF compliant silicone tubing at 1/8 inch OD.

Installation Notes

Installation requires no special tools beyond a sharp tube cutter or razor blade for clean cuts. Ensure all upstream pressure sources are shut off and depressurized before replacing or connecting tubing. Verify fitting compatibility with the 1/16 inch inner diameter before installation. Do not exceed the 10 psi rated working pressure or the 500 degrees F maximum temperature rating in service.