Nelson Wood Shims PSH8/12/36/75 Wood Shims 12 Pack

Product Description

The NELSON WOOD SHIMS PSH8/12/36/75 is a tapered wood shim bundle designed for leveling, aligning, and securing structural and finish elements in residential and light commercial construction. Each shim measures 3/8 inch thick at the wide end, tapering to 1/16 inch or less, and runs 8 inches in length with a 1-1/2 inch width. Made from kiln-dried northern white wood, these shims resist warping and hold fasteners well. Each bundle contains 12 shims. Carpenters, framers, and finish trades use them to achieve precise alignment during installation of door frames, window frames, cabinets, and structural members.

These shims are suited to a wide range of interior and exterior applications in residential construction and renovation. Common uses include setting door jambs and window frames plumb and level, shimming wall plates, leveling cabinets, aligning floor joists, installing furring strips, and filling gaps under splices on wood siding. For best results, shims should be used in pairs inserted from opposite sides to create a uniform bearing surface and maintain consistent thickness across the span.

Key Features

• Tapered profile: 3/8 inch thick at wide end to 1/16 inch or less at thin end
• 8 inch length provides adequate reach for most framing and finish applications
• Kiln-dried northern white wood construction minimizes warping and shrinkage
• 1-1/2 inch width suits standard door jamb and window frame shimming tasks
• 12 shims per bundle — use in pairs for best results
• Suitable for both structural shimming and finish carpentry applications

Compatibility

Designed for general-purpose shimming in wood-framed construction, including door jamb and window frame installation, cabinet setting, floor joist alignment, furring strip installation, and wood siding splice work.

Installation Notes

These shims are installed by carpenters, framers, and finish trades using standard hand tools. Insert shims in opposing pairs to distribute load evenly and avoid racking the assembly being shimmed. Score and snap or cut shims flush with a utility knife or handsaw once the assembly is secured. Follow applicable building codes for structural shimming applications, and ensure shims are fully seated before fastening.