Mueller Streamline 5893 Pvc Dwv Street 45 Elbow 4 in

Product Description

The MUELLER STREAMLINE 5893 is a 4-inch PVC DWV street 45-degree elbow designed for drain, waste, and vent piping systems in residential and commercial plumbing. The street configuration uses a spigot on one end and a hub on the other, allowing direct connection to the hub of an adjacent fitting without a short coupling. Manufactured to ASTM D2665, F1498, D331, and D1784 material specifications, this elbow delivers reliable chemical and corrosion resistance. Smooth interior walls minimize scaling and maintain consistent flow. Licensed plumbers and pipefitters install this fitting in gravity-drain systems where a 45-degree change of direction is required.

This fitting is suited for industrial, sanitary, and DWV applications where resistance to chemicals and corrosion is a priority. The spigot-by-hub end connection integrates directly into standard 4-inch PVC DWV piping systems without additional adapters. Typical installation scenarios include branch drain lines, main stack offsets, and horizontal-to-horizontal direction changes in both new construction and retrofit work. The fitting meets NSF 14 and UPC requirements, confirming it is suitable for potable-adjacent and sanitary drain applications under recognized plumbing codes.

Key Features

• 45-degree street elbow — spigot x hub ends for direct fitting-to-fitting connection
• 4-inch size accommodates main drain and branch drain applications
• PVC construction resists corrosion, scaling, and a broad range of chemicals
• Smooth interior walls promote free flow and reduce buildup
• Meets NSF 14 and UPC standards for use in sanitary and DWV systems
• Manufactured to ASTM D2665, F1498, D331, and D1784 specifications for dimensional consistency

Compatibility

Designed as an OEM-style replacement and new-installation fitting for standard 4-inch PVC DWV piping systems in residential and commercial drain, waste, and vent applications.

Installation Notes

Installation of PVC DWV fittings is typically performed by licensed plumbers following local plumbing codes and IPC or UPC guidelines. Shut off water supply and ensure the drain line is depressurized and empty before beginning work. Solvent-cement the spigot and hub connections using PVC primer and cement rated for DWV service, and allow adequate cure time before restoring flow. Do not use this fitting on pressurized supply lines.

Technical Specifications

• Fitting Type: Street Elbow
• Angle: 45 degrees
• Size A: 4 inches
• Size B: 4 inches
• End Connection: Spigot x Hub
• Material: PVC
• Material Specification: ASTM D2665 / F1498 / D331 / D1784
• Applicable Standard: NSF 14, UPC
• Application: Industrial, DWV, Sanitary, Chemical and Corrosion Resistance

Standard Information

• Brand: MUELLER STREAMLINE
• Manufacturer Part Number: 5893