Minwax 710270000 Oil Based Polyurethane Clear Ultra Flat 1 Gallon

Product Description

The MINWAX COMPANY, THE 710270000 is a clear, ultra flat, oil-based polyurethane wood finish designed to deliver long-lasting protection and a low-sheen surface on interior wood surfaces. This fast-dry formula reaches a recoatable state in 4 to 6 hours, allowing multiple coats to be applied in a single workday. Full protection is achievable in just 2 coats, making it an efficient choice for finishing floors, furniture, cabinetry, and trim. The VOC content is rated at 350 grams per liter. Note that this product may be restricted in certain low-VOC regulatory areas -- verify local compliance before ordering or applying.

This polyurethane finish is suited for interior wood surfaces in residential and light commercial settings. Typical applications include hardwood floors, raw or stained wood furniture, interior doors, window casings, and millwork. The ultra flat sheen produces a matte appearance that reduces surface glare, making it a common choice where a natural wood look is preferred over a glossy or satin finish. It is applied by brush, foam applicator, or lambswool pad depending on surface type and coverage area.

Key Features

• Ultra flat sheen delivers a matte, low-glare finish on interior wood
• Oil-based formula provides a durable, hard-wearing surface film
• Fast dry -- recoat in 4 to 6 hours
• Full protection in as few as 2 coats
• VOC content: 350 grams per liter
• Clear finish -- does not alter underlying wood tone significantly

Compatibility

Designed for use on interior bare, stained, or previously finished wood surfaces. No specific compatible model numbers or system families were provided in the product data.

Installation Notes

Application is typically performed by a finishing carpenter, flooring installer, or experienced tradesperson. Ensure the work area is well-ventilated before and during application, as oil-based coatings produce flammable vapors. Sand lightly between coats with fine-grit sandpaper and remove all dust before recoating. Check local and state VOC regulations before use, as this product may not be permitted in all jurisdictions.