Minwax 13020 Gloss Oil-based Polyurethane Floor Finish

Product Description

The Minwax 13020 is a gloss, oil-based polyurethane floor finish formulated specifically for hardwood floors. It delivers a durable, protective coating with a traditional amber tone, and it dries approximately 25 percent faster than standard oil-based polyurethane formulas. This product is designed for flooring contractors, finish carpenters, and experienced trades who need a fast-turnaround hardwood floor coating. The 1-gallon container covers typical residential floor sections per coat, and the accelerated dry time allows multiple coats to be applied within a single workday on most projects.

The 13020 is intended for use on interior hardwood floors in residential and light commercial settings. It can be applied directly over Minwax stain products once those products have fully cured. The formula does not require sanding or screening between coats, which reduces labor time on multi-coat applications. A lambswool applicator or natural bristle brush is the recommended application method. Allow 3 to 4 hours between coats under normal temperature and humidity conditions. Note that this product may be VOC-restricted in certain regions — verify local regulations before purchase and use.

Key Features

• Oil-based formula designed specifically for hardwood floor applications
• Gloss finish provides a traditional amber tone and high-sheen surface
• Dries approximately 25 percent faster than standard polyurethane, supporting same-day multi-coat schedules
• No sanding or screening required between coats, reducing labor time
• Compatible for application over Minwax stain products
• Apply with a lambswool applicator or natural bristle brush; recoat window is 3 to 4 hours

Compatibility

Designed for use on interior hardwood floors and can be applied over Minwax stain products. Verify regional VOC compliance before use, as this product may be restricted in certain areas.

Installation Notes

Application should be performed by a qualified flooring contractor or experienced finisher working in a well-ventilated space. Ensure the substrate is clean, dry, and free of contaminants before applying the first coat. Keep all ignition sources away from the work area during application and drying, as oil-based coatings are flammable. Dispose of applicators and rags in accordance with local fire and waste regulations to prevent spontaneous combustion risk.