Miller H7IC1A3 Fall Protection Harness 420 Lb 2XL 3XL

Product Description

The MILLER H7IC1A3 is a full body personal fall protection harness designed for workers at height in industrial, construction, and general trade environments. Part of the Miller H700 Series, it is built from polyester webbing and rated to a 420-pound load capacity with a 5,000-pound tensile strength. A single dorsal D-ring at the back serves as the fall arrest attachment point. The one-pull trauma relief step addresses suspension trauma risk during post-fall rescue, a critical safety consideration for any crew working elevated positions. Licensed riggers and safety-trained tradespeople are the primary installers and users of this harness.

The H7IC1A3 fits sizes 2X-Large and 3X-Large, making it suitable for larger-framed workers across roofing, steel erection, utility work, and other elevated-task environments. The configurable leg strap design allows adjustment to body geometry, while modular lightweight accessory straps accommodate tool or equipment attachments without adding significant bulk. This harness is appropriate for both residential and commercial jobsite applications where OSHA fall protection requirements apply.

Key Features

• Single back dorsal D-ring fall arrest attachment point
• One-pull trauma relief step reduces suspension trauma risk during post-fall hang
• Configurable leg strap design for individualized fit across large frame sizes
• Modular lightweight accessory straps for tool and equipment integration
• 420-pound load capacity with 5,000-pound tensile strength polyester construction
• Meets ANSI Z359.11, OSHA, and CSA Z259.10 standards

Compatibility

Designed as an OEM-style full body harness within the Miller H700 Series for personal fall arrest systems used in general industry and construction applications.

Installation Notes

This harness must be fitted and inspected by a competent person per OSHA 29 CFR 1926.502 and ANSI Z359 guidelines before each use. Power down or de-energize any adjacent electrical hazards before donning the harness in electrical trade environments. Inspect all webbing, buckles, and D-ring hardware for wear, cuts, or deformation prior to each use and remove from service immediately after any fall event. Installation and training should be performed by a qualified fall protection professional familiar with applicable OSHA and CSA requirements.