Miller 210WLS-Z7/6FTYL Positioning Restraint Lanyard 310 Lb

Product Description

The MILLER 210WLS-Z7/6FTYL is a single-leg positioning and restraint lanyard designed for use in fall protection systems on elevated work sites. Constructed from polyester webbing, this lanyard measures 6 feet in length and supports a load capacity of 310 pounds. Both the anchorage end and the harness end are fitted with locking snap hooks, providing secure, tool-free connection and release. The yellow webbing offers high visibility in the field. This lanyard is installed and used by safety-trained workers, contractors, and trade professionals working in environments where fall restraint or positioning is required by site safety plans.

This lanyard is suited for residential and commercial construction, industrial maintenance, and general elevated-work applications where a positioning or restraint system is required. It integrates into a complete fall protection assembly and is intended for use where the worker must be restrained from reaching a fall hazard rather than for fall arrest. The locking snap hook connections are compatible with standard D-ring harness attachments and fixed anchorage points commonly found on structural steel, scaffolding, and elevated platforms. It is not rated for arc flash work.

Key Features

• 310-pound load capacity for positioning and restraint applications
• 6-foot length (72 inches) provides controlled reach radius from anchorage point
• Polyester webbing construction resists abrasion and UV exposure
• Locking snap hook at both anchorage and harness connection ends
• 3/4-inch gate opening on snap hooks for standard D-ring compatibility
• High-visibility yellow color for site safety compliance
• Single-leg design for straightforward positioning setups

Compatibility

Designed for use with fall protection systems requiring a positioning and restraint lanyard with locking snap hook connections at both ends.

Installation Notes

Installation and use of this lanyard must be performed by a competent person as defined under applicable OSHA fall protection regulations. Inspect the webbing, stitching, and both snap hook gates for damage, wear, or deformation before each use. Connect the anchorage end to a fixed anchorage point rated for the application before attaching the harness end to the worker's harness D-ring. This lanyard is a restraint and positioning device only and must not be substituted for a fall arrest lanyard where fall arrest protection is required.