Midland Industries SC-200R-SP Right Spiral Clamp 2 in

Product Description

The MIDLAND INDUSTRIES SC-200R-SP is a right-hand spiral double bolt-drive clamp designed for secure, high-grip clamping on heavily corrugated suction hoses. Built from steel with a zinc-plated finish for corrosion resistance, this clamp provides a 2-inch nominal size with a minimum clamp diameter of approximately 2.008 inches (51 mm) and a maximum clamp diameter of approximately 2.205 inches (56 mm). The spiral design conforms to the corrugations of suction hose, distributing clamping force evenly and reducing the risk of hose distortion or blowoff. It is a bolt-drive style, meaning installation requires only a standard wrench or socket. Plumbers, irrigation techs, and industrial maintenance crews reach for this clamp when standard worm-drive clamps lack the grip surface needed for corrugated hose profiles.

This clamp is suited for applications involving corrugated suction hoses commonly found in pump intake lines, agricultural irrigation systems, industrial fluid transfer, and similar low-to-moderate pressure suction-side plumbing. The right-hand spiral configuration is the standard orientation for most suction hose clamp installations. Its compact profile and zinc-plated finish make it viable in both indoor utility and outdoor service environments where light moisture exposure is expected.

Key Features

• Right-hand spiral double bolt-drive design for reliable engagement on heavily corrugated suction hose
• 2-inch nominal size with clamp range from 51 mm to 56 mm (approximately 2.008 to 2.205 inches)
• Steel construction with zinc-plated finish for corrosion resistance
• Bolt-drive actuation compatible with standard wrenches and socket sets
• Even clamping force distribution reduces hose distortion at the connection point

Compatibility

Designed for use with heavily corrugated suction hoses in the 2-inch nominal size range with outside diameters between 51 mm and 56 mm. Verify hose outside diameter before installation to confirm fitment within the stated clamp range.

Installation Notes

Installation is performed by plumbers or mechanical technicians using a standard wrench or socket driver. Ensure the hose end is fully seated on the fitting barb or nipple before positioning the clamp. Tighten the bolt evenly and avoid overtightening, which can crack the hose bead or deform the spiral band. Inspect the clamp and hose connection periodically in high-vibration or pulsating-flow service.