Midland Industries PRBH-658X16 Pivot Boot Hose 150 Psi

Product Description

The MIDLAND INDUSTRIES PRBH-658X16 is a pivot boot hose rated for 150 psi working pressure and designed for demanding agricultural and irrigation pivot-system applications. The hose measures 6-5/8 inches in nominal diameter and 16 inches in length. The inner tube is constructed from rubber, and the 4-ply reinforcement construction supports a burst pressure rating of 450 psi. The temperature range spans from -30 degrees F to 176 degrees F, making this hose suitable for operation in both cold climates and high-heat environments. Licensed irrigation technicians and agricultural equipment mechanics are the primary installers of this component.

This hose is used in center-pivot and lateral-move irrigation systems where flexible, high-pressure connections are needed at pivot joints. The rubber tube construction handles the continuous flexing and movement inherent to pivot-system operation. At 6-5/8 inches nominal diameter and 16 inches in length, this hose fits the standard pivot boot connection points found on commercial-scale irrigation equipment. It is typically installed as a direct replacement during scheduled maintenance or after damage from field operation.

Key Features

• 150 psi working pressure rating for reliable performance under system load
• 450 psi burst pressure rating provides a substantial safety margin above working pressure
• 4-ply reinforcement construction adds durability and resistance to mechanical stress
• Rubber tube material withstands continuous flexing at pivot joints
• Wide temperature range: -30 degrees F to 176 degrees F
• 6-5/8 inch nominal diameter and 16 inch length match standard pivot boot connection sizing

Compatibility

Designed as an OEM-style replacement pivot boot hose for center-pivot and lateral-move irrigation systems requiring a 6-5/8 inch nominal diameter connection.

Installation Notes

Installation is typically performed by licensed irrigation technicians or agricultural equipment mechanics. Before replacing the hose, relieve all system pressure and shut off the water supply to the pivot line. Inspect connection fittings and clamps for wear or corrosion before reinstalling. Follow equipment manufacturer torque and clamp specifications as provided in the system service manual.