Midland Industries P-316-4-EXT Extruded Street Tee 1/4in Nptf Brass

Product Description

The MIDLAND INDUSTRIES P-316-4-EXT is a brass extruded street tee designed for use in compressed air, fluid, and gas piping systems where a reliable three-way branch connection is required. All three ports are sized at 1/4 inch Female NPTF, making this a uniform, same-size tee suited for low-complexity branch configurations. The extruded construction provides a dense, continuous grain structure that resists leaks under pressure cycling. At 0.15 pounds, the fitting is compact and lightweight, fitting into tight panel or manifold installations. Licensed plumbers, HVAC technicians, and pipefitters install this type of fitting as part of inline branch assemblies in both residential and light commercial piping runs.

This street tee is used in residential and light commercial applications wherever a 1/4 inch NPTF branch takeoff is needed from an existing inline run. Typical install scenarios include compressed air distribution manifolds, fuel gas branch lines, hydraulic control circuits, and instrument air tubing panels. The all-female NPTF thread configuration allows direct connection to male-threaded pipe nipples or male-end fittings on all three ports without adapters.

Key Features

• Extruded brass construction for a dense, leak-resistant grain structure
• Three 1/4 inch Female NPTF ports for uniform same-size branching
• Compact body measuring 1.6 inches in length and 1.05 inches in width
• Lightweight at 0.15 pounds, suitable for space-constrained panel installations
• NPTF thread form provides a pressure-tight dry-seal connection

Compatibility

Designed as an OEM-style replacement or new-installation brass street tee for 1/4 inch Female NPTF pipe systems in residential and light commercial plumbing, HVAC, and compressed air applications.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician in accordance with applicable IPC and IFGC codes. Shut off and depressurize the system completely before removing any existing fittings or threading in this tee. NPTF dry-seal threads are designed for a metal-to-metal seal; use appropriate thread sealant or PTFE tape only as required by the fluid service and local code. Avoid over-tightening, which can crack brass fittings or distort the thread seal.