Midland Industries D2501-S08-08 90-degree Male Elbow Steel

Product Description

The MIDLAND INDUSTRIES D2501-S08-08 is a 90-degree male elbow fitting designed for hydraulic tube and pipe connections. It transitions from an S08 Metric Bite Type (DIN compression) tube end to a 1/2-inch Male NPTF pipe thread, making it a cross-standard adapter in hydraulic plumbing circuits. Constructed from steel with a trivalent chromium zinc-plated finish for corrosion resistance, this elbow carries an anticipated pressure rating of 63 MPa. Thread specifications are M16 x 1.5 on the metric bite side and 1/2-14 on the NPTF pipe side. It conforms to DIN 2353 and ISO 8434-1 dimension standards and is suited for professional hydraulic system assembly.

This fitting is used in industrial and mobile hydraulic systems where a DIN metric compression tube line must connect to a standard NPTF pipe port at a 90-degree change of direction. Typical applications include hydraulic power units, mobile equipment, press systems, and machine tool circuits. The 90-degree elbow geometry allows routing tubing away from tight or obstructed port areas. Installation is performed by qualified hydraulic technicians and pipefitters working with steel tubing and hydraulic manifold assemblies.

Key Features

• 90-degree elbow geometry routes tubing at a right angle to the port face
• S08 Metric Bite Type (DIN compression) tube connection on one end
• 1/2-inch Male NPTF pipe thread on the opposing end
• Anticipated pressure rating of 63 MPa for high-pressure hydraulic service
• Trivalent chromium zinc-plated steel construction for corrosion resistance
• Conforms to DIN 2353 and ISO 8434-1 dimension standards

Compatibility

Designed as a DIN 2353 and ISO 8434-1 compliant replacement or component fitting for hydraulic systems requiring an S08 metric bite-type tube connection paired with a 1/2-inch Male NPTF pipe port.

Installation Notes

Installation should be performed by a qualified hydraulic technician or pipefitter. Depressurize and isolate the hydraulic circuit completely before removing or installing any fittings. Inspect tube ends for proper preparation and ensure the bite-type ferrule is correctly seated before tightening. Apply appropriate thread sealant to the NPTF side as required and follow torque practices consistent with DIN and ISO fitting standards.