Midland Industries CSL-60702-SP Crimplok Sleeve 6 in Steel

Product Description

The MIDLAND INDUSTRIES CSL-60702-SP is a plated steel Crimplok sleeve designed for use with 6-inch nominal hose assemblies. The sleeve measures 5.67 inches in length with a 7-1/8-inch inner diameter and 0.12-inch wall thickness. It provides the mechanical retention needed to secure hose ends during the crimping process, creating a leak-resistant, permanent connection in demanding fluid transfer applications. Weighing 4.32 pounds, this sleeve is built for durability in industrial and commercial settings where hose integrity is critical. Installation is typically performed by pipefitters, fluid power technicians, and industrial maintenance professionals.

This sleeve is intended for use in cam and groove hose assembly applications. It is compatible with specific Crimplok fittings and nipple configurations in industrial fluid transfer systems. The CSL-60702-SP suits applications where a secure, crimped hose termination is required on 6-inch hose assemblies, such as bulk transfer lines, industrial process plumbing, and agricultural or chemical transfer setups where cam and groove connections are standard practice.

Key Features

• 6-inch nominal size for large-bore hose assembly applications
• 5.67-inch length provides full crimping engagement along the hose end
• 7-1/8-inch inner diameter accommodates 6-inch nominal hose OD
• 0.12-inch wall thickness in plated steel for structural integrity under crimp load
• Compatible with Cam and Groove fittings and Crimplok crimp nipple series
• Robust 4.32-pound construction suited for high-demand fluid transfer environments

Compatibility

Designed for use with Cam and Groove Fittings (CGC/CGE-XXX-A1), CRIMPLOK Crimp Long Combination Nipples (CNL-XXXCR-SP), and CRIMPLOK (CNT/G-XXXCS-S/P) assemblies.

Installation Notes

Installation requires a hydraulic or mechanical crimping machine capable of handling 6-inch nominal sleeve dimensions. Relieve all system pressure and drain fluid from the hose assembly before disassembly or replacement. Ensure the hose end is cut cleanly and seated fully into the fitting before crimping to achieve a proper, leak-free termination. Verify crimp diameter and go/no-go gauge measurements against the fitting manufacturer specifications after crimping.