Midland Industries 73358R Polyurethane Tubing 8mm Id 100ft

Product Description

The MIDLAND INDUSTRIES 73358R is a red polyurethane tubing offered in a 100-foot roll, designed for pneumatic and fluid-transfer applications in industrial and commercial environments. With an 8 mm inner diameter and 12 mm outer diameter, the wall thickness measures 2 mm. The tubing carries a working pressure of 150 psi, a vacuum rating of 28 inHg, and a 3:1 safety factor. Shore A hardness of 98 gives the tube enough rigidity to hold shape while remaining flexible enough for routing. Licensed trades and industrial maintenance technicians are the primary installers.

This tubing is suited for pneumatic lines, automation equipment, and fluid conveyance systems where abrasion resistance and chemical resistance are priorities. The 28 mm minimum bend radius keeps pressure loss low in tight routing situations. The temperature range of -40 to 150 degrees F makes it suitable for both refrigerated environments and heated industrial spaces. The red color aids in color-coded line identification on multi-line installations.

Key Features

• Working pressure rated to 150 psi with a 3:1 safety factor
• 28 inHg vacuum rating for low-pressure vacuum line use
• Shore A 98 hardness for firm, kink-resistant routing
• Resistant to abrasion, chemicals, cold, heat, and kinking
• 28 mm minimum bend radius supports tight routing paths
• Compatible with push-to-connect, barb-type, and compression fittings
• 100-foot roll reduces field splices on longer runs

Compatibility

Designed for use with push-to-connect fittings, barb-type fittings, and compression fittings, as specified by the manufacturer.

Installation Notes

Depressurize and de-energize any system before cutting or connecting tubing. Use a clean, square cut with a proper tubing cutter to ensure a leak-free seal at push-to-connect fittings. Verify that the selected fitting bore matches the 8 mm inner diameter and that the fitting is rated for the system working pressure. Route tubing away from sharp edges and heat sources that exceed 150 degrees F.