Midland Industries 73207Y5 Polyethylene Tubing 500 Ft

Product Description

The MIDLAND INDUSTRIES 73207Y5 is a yellow LLDPE polyethylene tubing coil rated for light-duty fluid and gas transfer applications in plumbing, irrigation, and industrial service. The tubing measures 0.375 inches inner diameter and 0.500 inches outer diameter, with a wall thickness of 0.062 inches, and ships as a 500-foot coil. It carries a working pressure of 125 psi with a 3:1 safety factor, and a vacuum rating of 28 inHg. The LLDPE construction delivers flexibility alongside resistance to a broad range of chemicals, making this tubing a dependable choice for runs that require routing around obstacles or through tight spaces.

This tubing is suited for residential and light commercial installations where flexible polyethylene is specified. Common applications include potable water service lines, irrigation laterals, low-pressure pneumatic lines, and chemical transfer in controlled environments. The 2.5-inch minimum bend radius allows routing through confined areas without kinking. The yellow color is commonly used to distinguish gas service lines, though installation must always conform to applicable local codes and the fitting manufacturer's specifications. The 500-foot coil length reduces the number of field joints required on longer runs.

Key Features

• 125 psi working pressure with a 3:1 safety factor for reliable low-to-medium pressure service
• 28 inHg vacuum rating supports suction-side applications
• LLDPE construction provides chemical resistance and flexibility across a wide temperature range
• 2.5-inch bend radius allows tight routing without kinking
• Compatible with barb-type, push-to-connect, and compression style fittings
• 500-foot coil minimizes field splices on long runs

Compatibility

Designed for use with barb-type, push-to-connect, or compression style fittings sized for 0.375-inch ID or 1/2-inch OD polyethylene tubing.

Installation Notes

Installation should be performed by a licensed plumber or qualified tradesperson in accordance with applicable local plumbing and mechanical codes. Shut off and depressurize the supply line before making any connections. Use only fittings rated for the tubing's working pressure and compatible with LLDPE material. Do not exceed the rated working pressure of 125 psi or operate outside the -50 to 140 degrees F temperature range.