Midland Industries 73204G Polyethylene Tubing 1/4in Od 100ft

Product Description

The MIDLAND INDUSTRIES 73204G is a green polyethylene tubing sold in a 100-foot roll with a 1/4-inch outer diameter. Polyethylene tubing in this size is a lightweight, flexible conduit used to route fluids or gases in low-pressure applications across plumbing, irrigation, pneumatic, and light industrial systems. The tubing carries a Shore A hardness of 98 and a Shore D hardness of 45D, indicating a semi-rigid yet flexible wall suitable for bending around obstacles without kinking under normal routing conditions. Its rated temperature range runs from -50 to 140 degrees F, making it viable in both cold outdoor environments and warm mechanical spaces. Licensed plumbers, irrigation technicians, and HVAC service pros commonly work with tubing in this form factor.

This tubing is appropriate for residential and light commercial installations where a compact, chemical-resistant line is needed. Common applications include water supply lines to ice makers or filtration systems, pneumatic control lines, and irrigation distribution runs. The green color provides a visual identifier on job sites where multiple tubing lines are routed in parallel. The 100-foot roll length reduces the need for intermediate fittings on longer runs, which lowers potential leak points and simplifies rough-in work.

Key Features

• 1/4-inch OD with 100-foot continuous roll length minimizes mid-run fittings
• Chemical resistance properties suit a broad range of fluid and light gas applications
• Temperature rating of -50 to 140 degrees F supports both cold outdoor and warm indoor installs
• Shore A 98 and Shore D 45D hardness provides flexible yet semi-rigid handling
• Green color coding aids identification in multi-line installations
• Lightweight at 1.04 pounds per roll for easy handling on the job

Compatibility

Designed as an OEM-style and aftermarket replacement or supply-run tubing for low-pressure fluid and pneumatic systems requiring 1/4-inch OD polyethylene line.

Installation Notes

Installation is typically performed by licensed plumbers, irrigation technicians, or HVAC service technicians. Shut off the supply line and relieve system pressure before cutting or connecting tubing. Use a clean, square cut with a dedicated tubing cutter to ensure a proper seal at compression or push-to-connect fittings. Verify that all fittings are rated for polyethylene tubing and compatible with the working pressure and fluid type of the application.