Midland Industries 700072-1212 Brass Branch Tee 3/4 Comp X Mpt

Product Description

The MIDLAND INDUSTRIES 700072-1212 is a lead-free brass branch tee fitting designed for joining and branching copper, aluminum, or plastic tubing lines in plumbing and mechanical systems. It features two 3/4-inch compression ends and one 3/4-inch male pipe thread (MPT) outlet, allowing a single inline connection point to serve a branch takeoff. The lead-free brass construction meets modern potable water standards. The fitting is rated for temperatures from -40 to 250 degrees F, making it suitable for both cold and hot water service applications. Licensed plumbers and pipefitters are the typical installers for this type of fitting.

This branch tee is used in residential and light commercial plumbing systems where a compression-style branch connection to a threaded port is required. Common applications include water supply distribution, hydronic systems, and any configuration where copper or plastic tubing must be connected to a threaded male port. The compression connections eliminate the need for soldering at those ports, which is useful in retrofit and repair scenarios. Thread specification is 1-18 x 3/4-14.

Key Features

• Lead-free brass construction suitable for potable water applications
• Two 3/4-inch compression connections accept copper, aluminum, or plastic tubing
• 3/4-inch MPT outlet for threaded branch connection
• Rated -40 to 250 degrees F for broad temperature range serviceability
• Thread spec 1-18 x 3/4-14 for precise thread engagement
• No-solder compression ends reduce installation time on retrofit work

Compatibility

Designed for use with copper, aluminum, or plastic tubing. Suitable as an OEM-style replacement or new-installation fitting in compression-based plumbing and mechanical piping systems.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC standards. Shut off and depressurize the water supply before disassembly or fitting installation. Compression fittings require proper seating of the ferrule against the tubing - do not overtighten, as this can deform the ferrule and cause leaks. Apply thread sealant or PTFE tape to the MPT threads before making up the threaded connection.