Midland Industries 67709 Reducer Face Bushing 3/4 Mpt X 1/2 Fpt

Product Description

The MIDLAND INDUSTRIES 67709 is a reducer face bushing designed to transition between a 3/4-inch male pipe thread (MPT) and a 1/2-inch female pipe thread (FPT) in threaded pipe assemblies. Manufactured from black steel, this bushing meets ASME B16.14-1991 dimensional standards and carries a pressure rating of 150/300 psi. At 0.62 inches in length and weighing approximately 0.10 pounds, it is a compact fitting suited for tight-clearance installations. Plumbers, pipefitters, and HVAC mechanics install this type of bushing when reducing pipe size at a connection point without adding significant length to the run.

This face bushing is appropriate for residential and light commercial black steel pipe systems, including gas distribution, compressed air, and similar low-to-medium pressure threaded piping applications. The external 3/4-14 NPT thread engages a female-threaded port or fitting, while the internal 1/2-14 NPT thread accepts the male end of the downstream pipe or component. Its black steel construction makes it a common choice in gas piping installations where galvanized fittings are not required or permitted.

Key Features

• Reduces 3/4 in MPT to 1/2 in FPT in a single compact fitting
• Black steel construction suitable for gas and air piping service
• Meets ASME B16.14-1991 dimensional standards
• Rated to 150/300 psi for reliable service in standard threaded systems
• 3/4-14 x 1/2-14 NPT thread form for consistent engagement
• Compact 0.62-inch length minimizes protrusion at the connection point

Compatibility

Designed as an OEM-style replacement or new-installation fitting for standard 3/4 in to 1/2 in threaded black steel pipe systems conforming to ASME B16.14 dimensional requirements.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or HVAC technician in accordance with applicable local codes and IFGC or IPC requirements. Depressurize and isolate the pipe system completely before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape to the male threads before assembly. Do not over-tighten; use a properly sized pipe wrench and follow standard trade practice for steel threaded fittings.