Midland Industries 65324 Reducing Tee Malleable Iron 150 Lb

Product Description

The MIDLAND INDUSTRIES 65324 is a malleable iron reducing tee rated for 150 lb service, designed for threaded pipe assemblies requiring three different connection sizes in a single fitting. It features female pipe thread (FPT) connections on all three ports: 1-1/2 inches on the run inlet, 1-1/4 inches on the run outlet, and 1/2 inch on the branch. Built to ANSI B16.3 dimensional standards, this fitting handles system temperatures from -20 to 350 degrees F. The black finish is standard for gas and general-purpose piping applications. Plumbers and pipefitters rely on this type of reducing tee to branch off or reduce flow in a single step without adding extra fittings to the assembly.

This reducing tee is suited for residential and light commercial piping systems where a main line must be tapped or reduced in a compact configuration. Common applications include natural gas distribution lines, black iron steam or heating piping, and general industrial pipe runs where malleable iron fittings are specified. The three distinct port sizes allow a single fitting to serve as both a reducer and a branch point, consolidating connections in tight spaces.

Key Features

• All three ports are female pipe thread (FPT) for standard threaded pipe connections
• Malleable iron construction rated to 350 degrees F and -20 degrees F lower limit
• 150 lb pressure class per ANSI B16.3 dimensional standards
• Black finish appropriate for gas and non-potable piping service
• Three-port size reduction in one fitting: 1-1/2 in x 1-1/4 in x 1/2 in
• Lightweight at 0.47 pounds, minimizing load on threaded connections

Compatibility

Designed as an OEM-style replacement or new-installation fitting for black malleable iron 150 lb threaded piping systems following ANSI B16.3 standards.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with the International Fuel Gas Code (IFGC) or applicable local mechanical codes when used in gas service. Shut off and depressurize the piping system completely before disassembly or fitting installation. Apply an appropriate thread sealant or tape rated for the service medium to all male threads before making up the joint. Do not over-tighten threaded connections, as malleable iron fittings can crack if excessive force is applied.