Midland Industries 65282 Reducing Tee 3/4x3/4x1/4 Fpt 150lb

Product Description

The MIDLAND INDUSTRIES 65282 is a malleable iron reducing tee rated at 150 lb pressure class, designed for threaded pipe assemblies in gas, air, and general-purpose piping systems. It features two 3/4 in female pipe thread (FPT) ports on the run and a 1/4 in FPT branch port, conforming to ANSI B16.3 dimensional standards. The black finish indicates non-galvanized construction, standard for dry gas and air service. The fitting handles temperatures from -20 to 350 degrees F, making it suitable for a wide range of residential and light commercial installations. Licensed plumbers, pipefitters, and HVAC technicians are the primary installers.

This reducing tee is used in residential and light commercial piping runs where a branch takeoff of a smaller diameter is required without the need for an additional bushing. Typical applications include natural gas distribution lines, compressed air systems, and low-pressure steam or hydronic branch connections. The 3/4-14 run threads and 1/4-18 branch thread conform to ANSI B16.3, ensuring consistent fitment with standard NPT fittings throughout the assembly.

Key Features

• 150 lb pressure class malleable iron construction per ANSI B16.3
• 3/4 in FPT x 3/4 in FPT x 1/4 in FPT port configuration for inline branch reduction
• Operating temperature range of -20 to 350 degrees F
• Black non-galvanized finish suitable for gas and dry air service
• 3/4-14 x 1/4-18 NPT thread sizing for standard pipe compatibility
• Center-to-end dimension of 1.05 x 1.08 inches for compact installation

Compatibility

Designed as an OEM-style replacement or new-installation fitting compatible with standard 150 lb malleable iron NPT threaded piping systems conforming to ANSI B16.3.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC) where applicable. Shut off and depressurize the supply line completely before disassembling any threaded connection. Apply an appropriate thread sealant or PTFE tape rated for the intended service medium before making up the joint. Do not over-torque malleable iron fittings, as this can crack the casting.