Midland Industries 62393 1/2 in Npt Pipe Cross 304 Stainless

Product Description

The MIDLAND INDUSTRIES 62393 is a four-way pipe cross fitting machined from 304 stainless steel for use in fluid and gas distribution systems. All four ports are 1/2-inch Female NPT, threaded at 1/2-14 TPI, making this a symmetrical cross with no preferred flow direction. The fitting is rated to 150 psi and falls within the 150-pound pressure class. It is installed by licensed plumbers, pipefitters, and mechanical contractors in both commercial and industrial applications where corrosion resistance is a priority. The 304 stainless steel construction resists rust and oxidation across a broad range of service media.

This cross fitting is suited for branching pipelines that carry air, water, oil, natural gas, or steam. It is commonly found in mechanical rooms, process piping headers, compressed air distribution manifolds, and hydronic systems where a single line must split into three directions at one junction. The all-female NPT configuration accepts standard male NPT pipe, nipples, or male-end valves on all four ports. Its compact form factor makes it practical in tight equipment rooms or panel installations.

Key Features

• Four-port symmetrical cross: all four connections are 1/2-inch Female NPT at 1/2-14 thread
• 304 stainless steel construction resists corrosion in wet, steam, and chemical-adjacent environments
• 150 psi pressure rating meets 150-pound class piping system requirements
• Compatible with air, water, oil, natural gas, and steam service media
• Compact profile at 2.1 inches wide and 1 inch tall for installation in confined spaces

Compatibility

Rated for use with air, water, oil, natural gas, and steam service. Designed for 150-pound class piping systems using 1/2-inch Male NPT pipe, nipples, or male-end fittings on all four ports.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable mechanical and plumbing codes, including IPC and IFGC where gas service is involved. De-pressurize and isolate the line completely before making or breaking any threaded connection. Apply appropriate thread sealant or PTFE tape to all male NPT threads before assembly. Do not over-tighten threaded connections in stainless fittings, as galling can occur.