Midland Industries 62190MS 45-deg Elbow 3in Fnpt 304 Ss

Product Description

The MIDLAND INDUSTRIES 62190MS is a 45-degree pipe elbow from the SP-114 fitting series, machined from 304 stainless steel and rated for 150 lb pressure service. Both ends are 3-inch Female NPT, making it a direct threaded connection on both sides with no adapters required. At 3.49 pounds and measuring 4.05 inches in height, 4.4 inches in length, and 5.25 inches in width, this is a solid, full-size fitting suited for demanding piping runs where corrosion resistance and directional change are both needed. Licensed plumbers and pipefitters install this class of fitting in process, industrial, and commercial mechanical systems.

The 62190MS is designed for use in piping systems that require a 45-degree change of direction on a 3-inch line. The 304 stainless steel construction makes it appropriate for applications where corrosion resistance is a priority, including water supply, chemical transfer, food service, and general process piping. The 150 lb pressure class and Female NPT connections on both ends suit standard threaded pipe assemblies in commercial and light industrial installations. This fitting belongs to the SP-114 series, which covers 304 stainless steel threaded fittings for professional piping work.

Key Features

• 45-degree elbow geometry for directional pipe routing without a sharp 90-degree turn
• 3-inch Female NPT on both ends for standard threaded pipe connections
• 304 stainless steel construction for corrosion resistance in wet and process environments
• 150 lb pressure class rating for commercial and light industrial service
• Part of the SP-114 series of 304 stainless steel threaded fittings

Compatibility

Designed as an OEM-style threaded fitting replacement or new installation component for 3-inch NPT piping systems rated to 150 lb pressure class in commercial, industrial, and process piping applications.

Installation Notes

This fitting is typically installed by licensed plumbers or pipefitters working under applicable mechanical and plumbing codes such as the IPC or ASME B31.3. Before installation, isolate and depressurize the line completely and verify the pipe threads are clean and undamaged. Apply appropriate thread sealant or PTFE tape to the male pipe threads before making up the connection. Do not overtighten threaded stainless fittings, as galling can occur on stainless-to-stainless thread contact.