Midland Industries 62164 90 Deg Street Elbow 3/4 in Ss

Product Description

The MIDLAND INDUSTRIES 62164 is a 90-degree street elbow fitting designed for use in fluid and gas piping systems where a direction change is required within a tight space. Machined from 304 stainless steel, it connects a 3/4-inch male NPT thread on one end to a 3/4-inch female NPT thread on the other, conforming to ASME B1.20.1 thread dimensional standards. Rated at 150 lb pressure class with a working pressure of 300 psi, this elbow is suited for service lines carrying air, water, oil, natural gas, or steam. Licensed plumbers, pipefitters, and HVAC technicians are the primary installers.

This street elbow is intended for residential and light commercial piping applications where an inline male-to-female 90-degree turn is needed without the use of a separate nipple. Its 304 stainless steel construction makes it appropriate for corrosive environments or installations where carbon steel fittings are not suitable. Common applications include gas supply lines, compressed air distribution, water service piping, steam lines, and oil service connections where a compact directional change is required.

Key Features

• 90-degree street configuration allows direct male-to-female inline direction change without an additional nipple
• 304 stainless steel construction provides corrosion resistance for demanding service environments
• Rated to 300 psi working pressure at 150 lb pressure class
• Compatible with air, water, oil, natural gas, and steam service
• 3/4-14 NPT thread form conforms to ASME B1.20.1 dimensional standards
• Compact geometry: 2.25 inches in length, 1.25 inches in height, 1.75 inches in width

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 3/4-inch NPT piping systems in 150 lb rated service lines handling air, water, oil, natural gas, or steam.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician following applicable local codes and IFGC or IPC requirements for the service type. Shut off and depressurize the line completely before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape rated for the intended service medium before making up the joint. Do not overtighten threaded connections; hand-tighten and then use a wrench to achieve a proper seal without stressing the fitting body.