Midland Industries 611096 Worm Gear Clamp 4-1/2 in Ss

Product Description

The MIDLAND INDUSTRIES 611096 is a worm gear hose clamp from the 611 Series, designed for securing hoses and tubing in plumbing, HVAC, and general industrial applications. The clamp features a stainless steel band and housing with a carbon steel screw, providing corrosion resistance and reliable holding strength. The band measures 1/2 inch wide and is rated to 50 in-lb torque. With a nominal diameter of 4-1/2 inches and an operating range of 4-1/2 inches minimum to 6-1/2 inches maximum clamp diameter, this clamp accommodates a variety of hose and fitting sizes. It meets SAE 96 specifications. Licensed plumbers, HVAC technicians, and pipefitters commonly install this clamp type in both residential and light commercial settings.

The 611096 is suited for general-purpose clamping tasks where a durable, adjustable band clamp is required. Typical applications include securing flexible hoses on HVAC ductwork connections, plumbing supply and drain lines, and equipment fittings. The wide adjustment range of 4-1/2 to 6-1/2 inches makes it usable across multiple hose or pipe sizes within that span, reducing the number of clamp sizes a technician needs on hand in the field.

Key Features

• Stainless steel band and housing with carbon steel screw for corrosion resistance
• Adjustment range of 4-1/2 to 6-1/2 inches clamp diameter
• 1/2-inch wide band for consistent load distribution around the hose
• 5/16-inch single bolt drive for standard hex driver or screwdriver installation
• Rated to 50 in-lb torque
• Meets SAE 96 specification

Compatibility

Designed as a general-purpose worm gear clamp suitable for hoses and fittings with an outside diameter between 4-1/2 and 6-1/2 inches, conforming to SAE 96 standards for hose clamp applications.

Installation Notes

Install and service performed by licensed plumbers, HVAC technicians, or pipefitters following applicable IPC and IFGC codes. Ensure the hose or fitting is fully seated before tightening the clamp. Tighten the worm gear screw with a 5/16-inch hex driver or flat-blade screwdriver to the rated torque. Do not overtighten beyond rated torque limits, as this can deform the hose or damage the clamp band.