Midland Industries 55292 Pvc Pipe Nipple 2in Mpt 30in Sch 80

Product Description

The MIDLAND INDUSTRIES 55292 is a Schedule 80 PVC pipe nipple designed for threaded plumbing connections in pressure-rated systems. Measuring 30 inches in length with a 2-inch diameter, it features male pipe thread (MPT) on both ends conforming to a 2-11-1/2 thread form per ASTM F1498 dimensional standards. Manufactured from dark gray PVC, this nipple carries a 200 psi pressure rating, making it suitable for higher-demand applications where standard Schedule 40 fittings fall short. Plumbers and pipefitters install this type of fitting when extending or connecting threaded PVC runs in both above-ground and below-ground scenarios.

This nipple is used in residential and light commercial plumbing systems where Schedule 80 PVC pipe and fittings are specified. Common applications include chemical handling, irrigation distribution headers, water treatment, and industrial process lines where corrosion resistance and moderate pressure capacity are required. The dark gray color is standard for Schedule 80 PVC and distinguishes it from Schedule 40 fittings in the field, reducing the risk of mixing incompatible pressure-rated components during installation.

Key Features

• Schedule 80 pressure rating at 200 psi for use in higher-pressure threaded PVC systems
• 2 in MPT x 2 in MPT configuration for male-to-female threaded connections on both ends
• 30 inch length provides extended reach without additional couplings
• Dark gray PVC construction resists corrosion, chemicals, and UV degradation
• Thread form conforms to ASTM F1498 for dimensional consistency with standard fittings

Compatibility

Designed as an OEM-style replacement and standard-fit component for Schedule 80 PVC threaded plumbing systems using 2-inch MPT fittings and conforming to ASTM F1498 thread specifications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable IPC and local plumbing codes. Shut off system pressure and drain the line before removing or installing any threaded fittings. Use PTFE thread tape or an approved pipe thread sealant rated for PVC and the media being conveyed - do not use petroleum-based compounds that can degrade PVC. Hand-tighten first, then apply only moderate wrench pressure to avoid cracking the fitting body.