Midland Industries 52167 Pipe Nipple 2 in Mpt Sch 80 316 Ss

Product Description

The MIDLAND INDUSTRIES 52167 is a seamless Schedule 80 pipe nipple machined from 316 stainless steel, designed for high-pressure fluid and gas piping systems. Both ends terminate in 2-inch male pipe thread (MPT) connections following ANSI/ASME B1.20.1 thread standards, with a 2-11-1/2 thread form. The overall length is 5-1/2 inches and the nominal diameter is 2 inches. At a pressure rating of 3000 psi, this nipple is built for demanding service conditions where standard fittings fall short. Licensed plumbers, pipefitters, and industrial mechanics are the primary installers for this class of fitting.

This nipple is rated for use in air, water, oil, natural gas, and steam service, making it a versatile fitting across commercial and industrial piping applications. The 316 stainless steel alloy provides corrosion resistance in environments where moisture, chemicals, or aggressive media are present. SCH 80 wall thickness supports elevated pressures, making this fitting appropriate for process piping, HVAC hydronic systems, and steam distribution lines where a robust threaded connection is required.

Key Features

• Schedule 80 seamless construction rated to 3000 psi
• 316 stainless steel for superior corrosion resistance
• 2 in MPT x 2 in MPT connections on both ends
• 5-1/2 inch overall length with 2 in nominal diameter
• Threads conform to ANSI/ASME B1.20.1 standard
• Rated for air, water, oil, natural gas, and steam service

Compatibility

Designed for use with air, water, oil, natural gas, and steam piping systems requiring 2-inch MPT Schedule 80 threaded fittings that meet ANSI/ASME B1.20.1 dimensional standards.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable plumbing and mechanical codes. Shut off and depressurize the system completely before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape rated for the service medium before making up the joint. Do not overtighten; use a pipe wrench on the hex or pipe body, not on the threaded ends, to avoid deforming the fitting.