Midland Industries 46336 Air Cock 1/4 in Mip Lever Hex Brass

Product Description

The MIDLAND INDUSTRIES 46336 is a 1/4-inch brass air cock designed for controlled air release and shutoff in compressed air lines and pneumatic systems. It features a lever handle operator for quick quarter-turn actuation and a hex body profile for wrench engagement during installation. Rated to 80 psi, this fitting connects via a male iron pipe (MIP) inlet on one end and a bibb nose outlet on the other, making it well suited for hose attachment and blowdown applications. The all-brass body provides corrosion resistance in typical shop-air and light industrial environments. Licensed plumbing and HVAC technicians as well as industrial maintenance professionals commonly install this type of valve.

This air cock is used in residential and light commercial compressed air distribution, pneumatic tool circuits, and utility air lines where a compact inline shutoff is needed. The bibb nose outlet accommodates standard hose couplings and blow-off nozzles. Its compact footprint - measuring 2.3 inches in length and 1.4 inches in width - makes it practical in tight manifold or wall-bracket installations. The 0.56-inch hex body allows installation and removal with a standard open-end or adjustable wrench without requiring specialized tooling.

Key Features

• Rated to 80 psi for compressed air service
• Lever handle allows fast quarter-turn open and close operation
• MIP inlet threads for direct pipe or fitting connection
• Bibb nose outlet for hose and nozzle attachment
• 0.56-inch hex body for wrench-assisted installation
• Brass construction resists corrosion in air and light fluid service

Compatibility

Designed as an OEM-style replacement or new-installation air cock for 1/4-inch MIP compressed air lines and pneumatic utility circuits requiring a bibb nose discharge point.

Installation Notes

Installation is typically performed by licensed plumbers, pipefitters, or qualified mechanical technicians. Depressurize and isolate the air line completely before removing any existing fitting or installing this valve. Apply thread sealant or PTFE tape to the MIP threads per the applicable mechanical code before making up the joint. Do not exceed the rated 80 psi working pressure in service.