Midland Industries 43103 Bronze Fpt Elbow 1/2 in

Product Description

The MIDLAND INDUSTRIES 43103 is a bronze 90-degree elbow fitting with 1/2-inch female pipe thread (FPT) on both ends. Built to an extra-heavy (XH) schedule rating, it delivers greater wall thickness and pressure resistance compared to standard fittings. The 1/2-14 thread designation confirms dimensional conformance to NPT standards. This fitting is used to redirect piping runs at a 90-degree angle in pressurized systems and is installed by licensed plumbers, pipefitters, and mechanical contractors working on water, steam, or compatible fluid service lines.

This elbow is suited for residential and light commercial applications requiring a durable, corrosion-resistant bronze fitting at 1/2-inch pipe size. Typical installations include hot and cold water distribution, compressed air lines, steam service, and other fluid systems where bronze material compatibility is appropriate. The FPT x FPT configuration accepts male-threaded pipe or nipples on both ports, making it straightforward to integrate into existing threaded piping systems.

Key Features

• Extra-heavy (XH) schedule rating for increased wall thickness and pressure capacity
• Bronze construction provides corrosion resistance for water, steam, and compatible fluid service
• 1/2-inch FPT on both ends accepts standard NPT male-threaded pipe or fittings
• 1/2-14 thread designation confirms NPT thread form compliance
• Compact profile: 1.4 inches height, 1.8 inches length, 2 inches width

Compatibility

Designed as an OEM-style replacement or new-installation bronze elbow for 1/2-inch female pipe thread (FPT) threaded piping systems in plumbing, mechanical, and fluid distribution applications.

Installation Notes

Licensed plumbers or pipefitters should install this fitting following applicable IPC or local plumbing code requirements. Shut off and depressurize the system and drain fluid from the line before beginning work. Apply an appropriate thread sealant or PTFE tape to the male threads being joined before tightening. Do not over-tighten; use a pipe wrench with a backup wrench on adjacent fittings to avoid stressing connected piping.