Midland Industries 34064 Soft Nose Tailpiece Assembly Npt Pol

Product Description

The MIDLAND INDUSTRIES 34064 is a soft nose tailpiece assembly designed for LP gas service connections where a POL fitting interface is required. The assembly measures 2.375 inches in length and connects a 1/4-inch NPT threaded fitting to a POL outlet, providing a secure, leak-resistant transition between a gas appliance supply line and a POL valve. Soft nose tailpieces are specified where a flared seat is not present on the mating component, allowing the soft nose tip to form a positive seal under torque. This fitting is handled by licensed plumbers and gas service technicians during appliance hookup and regulator service.

The 34064 is suited for residential and light commercial LP gas applications, including propane cylinder connections, portable appliance hookups, and regulator outlet service. The NPT x POL configuration makes it a common replacement or service part when reconnecting gas lines to POL-style valves or manifolds. It falls within the standard brass POL fittings category used across propane distribution and service work.

Key Features

• Soft nose tip forms a positive seal without a flared seat on the mating component
• 1/4-inch NPT thread on one end for standard threaded pipe connections
• POL connection on the opposing end for LP cylinder valve interface
• 2.375-inch overall length fits standard service configurations
• Brass construction typical of POL fitting assemblies for corrosion resistance in propane service

Compatibility

Designed as an OEM-style replacement for LP gas service applications requiring a 1/4-inch NPT x POL soft nose tailpiece assembly.

Installation Notes

Installation should be performed by a licensed plumber or qualified gas service technician in accordance with applicable local codes and NFPA 54 or NFPA 58 requirements. Shut off all gas supply and depressurize the line before removing or installing any fitting. Do not use pipe thread sealant on POL threads, as the soft nose provides the primary seal at that end. Inspect the soft nose tip for damage before installation and replace if deformation is present.