Midland Industries 34046 Brass Pol X Flare Adapter

Product Description

The MIDLAND INDUSTRIES 34046 is a brass POL-to-flare adapter designed to transition between a 0.88-14 LH POL connection and a 1/2 inch flared fitting. The left-hand POL thread is standard for LP gas service, making this adapter a common component in propane supply lines and appliance connections. Machined from brass, it provides corrosion resistance and reliable sealing in low-pressure fuel gas applications. At 0.21 pounds and measuring 2 inches in length, it is compact and straightforward to install inline with existing gas piping or appliance flex connectors. Plumbers and gas service technicians working on residential and light commercial propane systems reach for this fitting when adapting POL regulator outlets to flared tubing runs.

This adapter fits applications where a propane cylinder valve or regulator with a standard 0.88-14 LH POL outlet must connect to a 1/2 inch flared copper or brass tubing assembly. Typical installations include LP gas supply lines to furnaces, water heaters, ranges, and portable propane appliances. The flared end accepts standard 45-degree SAE flare fittings common in residential gas piping. It is a single-piece, no-weld fitting suited for both permanent installations and serviceable connections that may require periodic disconnection.

Key Features

• 0.88-14 LH POL male inlet - standard left-hand thread for LP gas POL regulator and cylinder valve connections
• 1/2 inch flared female outlet - accepts standard 45-degree SAE flare fittings
• Brass construction - corrosion-resistant material suited for LP gas service
• Compact 2 inch length - fits in tight spaces near regulators or appliance inlets
• Lightweight at 0.21 pounds - easy to handle during single-technician installations

Compatibility

Designed as an OEM-style brass POL adapter for residential and light commercial propane gas supply systems using 0.88-14 LH POL regulator outlets transitioning to 1/2 inch flared tubing connections.

Installation Notes

Gas fitting installation must be performed by a licensed plumber or qualified gas service technician in accordance with IFGC requirements and applicable local codes. Shut off the propane supply at the cylinder or service valve and verify zero pressure in the line before making or breaking any connections. Apply an LP-rated thread sealant or use the proper flare seating technique on the flared end - do not use pipe dope on flare seats. After installation, pressure-test all connections with an approved leak detection method before returning the system to service.