Midland Industries 32367 Brass 1/8 Inch Hose Barb Tee

Product Description

The MIDLAND INDUSTRIES 32367 is a three-way brass hose barb tee fitting designed for low-pressure fluid and air distribution lines. All three ports are 1/8-inch hose barb connections, allowing a single supply line to split into two branch lines or three lines to converge at one junction. The fitting is rated for a maximum operating pressure of 150 psi and a temperature range of -40 to 160 degrees F, making it suitable for a wide range of light-duty plumbing, HVAC, and pneumatic hose assemblies. Licensed plumbers, HVAC technicians, and experienced service professionals install this fitting as part of hose-based distribution systems.

This fitting is used in residential and light commercial applications where small-diameter hose lines require a branch connection. Typical install scenarios include condensate drain lines, pneumatic control tubing, fuel vapor lines, and fluid transfer assemblies. The brass construction resists corrosion in both wet and dry service environments. The 1/4-inch body size accommodates the 1/8-inch barb ports and is compatible with hose clamps, similar-type clamps, or crimped ferrules for a secure, leak-resistant connection.

Key Features

• All three ports are 1/8-inch hose barb connections for consistent line sizing
• Maximum operating pressure of 150 psi for low-pressure fluid and air service
• Operating temperature range of -40 to 160 degrees F
• Brass construction provides corrosion resistance in wet and dry environments
• Compatible with hose clamps, similar-type clamps, or crimped ferrules
• 1/4-inch body size with compact overall dimensions for tight spaces

Compatibility

Designed for use with 1/8-inch inner diameter hose assemblies secured with hose clamps, similar-type clamps, or crimped ferrules. Suitable for low-pressure fluid, air, and vapor distribution lines in residential and light commercial systems.

Installation Notes

Installation is performed by licensed plumbers, HVAC technicians, or qualified service professionals. Depressurize and drain the hose circuit completely before removing or installing any fittings. Seat the hose fully over each barb and secure with an appropriate hose clamp or crimped ferrule to prevent pull-off under pressure. Verify that the hose material and clamp type are rated for the fluid, pressure, and temperature conditions of the application before placing the system back into service.