Midland Industries 29FS-68 Ball End Swivel Connector Brass

Product Description

The MIDLAND INDUSTRIES 29FS-68 is a brass ball end swivel connector designed to join a 3/8-inch hose barb to a 1/2-inch female NPSM swivel connection. The swivel end allows rotational movement during installation, reducing hose twist and stress at the connection point. Built from brass, the fitting handles a maximum operating pressure of 150 psi and an operating temperature range of -40 to 160 degrees F. The 1/2-14 thread and 0.94-inch hex allow for straightforward wrench engagement. This fitting is installed by licensed plumbers and HVAC mechanics in fluid transfer and hose assembly applications.

The 29FS-68 is suited for residential and light commercial hose assembly work where a flexible, rotatable end connection is required. The hose barb end accepts hose secured with a hose clamp, a similar-style clamp, or a crimped ferrule. This makes it compatible with standard hose termination methods used in HVAC, plumbing, and industrial fluid transfer lines operating within the rated pressure and temperature limits.

Key Features

• 3/8-inch hose barb inlet accepts standard hose with clamp or crimped ferrule retention
• 1/2-inch female NPSM swivel outlet allows rotation to eliminate hose twist during makeup
• Rated to 150 psi maximum operating pressure
• Operating temperature range of -40 to 160 degrees F
• 0.94-inch hex for wrench engagement during installation
• Brass construction provides corrosion resistance in fluid transfer service

Compatibility

Designed for use with hose assemblies secured by hose clamps, similar-style clamps, or crimped ferrules on the 3/8-inch barb end, and threaded connections using 1/2-14 NPSM female swivel on the outlet end.

Installation Notes

This fitting is typically installed by licensed plumbers or HVAC technicians. Shut off system pressure and relieve any residual line pressure before disconnecting or installing fittings. Use a wrench on the 0.94-inch hex to tighten the swivel nut - do not overtighten brass fittings, as the material can crack under excessive torque. Ensure the hose barb end is fully inserted into the hose before securing with the appropriate clamp or ferrule per the hose manufacturer's recommendation.