Midland Industries 29-46 Rigid Adapter Hose Barb Brass

Product Description

The MIDLAND INDUSTRIES 29-46 is a rigid brass adapter fitting designed to connect a 1/4-inch hose barb on one end to a 3/8-inch male NPTF thread on the other. It serves as a transition point between flexible hose assemblies and threaded pipe connections in fluid transfer systems. The fitting is rated to 150 psi maximum operating pressure and handles temperatures from -40 to 160 degrees F. At 0.06 pounds and 1.65 inches in length, it is a compact, durable component suited for plumbing, HVAC, and industrial piping applications. Licensed plumbers, HVAC technicians, and pipefitters install this type of fitting as part of hose-to-pipe transitions.

This adapter is used in residential and light commercial systems where a flexible hose must terminate at a threaded pipe port. The hose barb end is compatible with hose clamps, similar-type clamps, or a crimped ferrule, giving installers flexibility in how the hose is secured. It fits into tight spaces due to its compact profile and is well-suited for water, air, and compatible fluid service lines operating within its rated pressure and temperature range.

Key Features

• 1/4-inch hose barb inlet transitions to 3/8-inch male NPTF threaded outlet
• Rated to 150 psi maximum operating pressure
• Operating temperature range: -40 to 160 degrees F
• Compatible with hose clamps, similar-type clamps, or crimped ferrules
• Brass construction for corrosion resistance in fluid service
• 0.68-inch hex for standard wrench installation

Compatibility

Designed as an OEM-style replacement or new-installation fitting for hose-to-male-pipe transitions in plumbing, HVAC, and fluid transfer assemblies using 1/4-inch hose barb and 3/8-inch male NPTF connections.

Installation Notes

This fitting is typically installed by licensed plumbers or HVAC technicians. Shut off the fluid supply and relieve system pressure before removing or installing any fitting. Apply appropriate thread sealant or PTFE tape to the male NPTF threads per standard practice and applicable plumbing codes. Do not over-tighten; use a wrench on the hex flats rather than gripping the barb body.