Midland Industries 28760F 90 Deg Elbow 7/16 Jic X 1/8 Mip Brass

Product Description

The MIDLAND INDUSTRIES 28760F is a forged brass 90-degree elbow fitting designed for hydraulic tubing applications. It connects a 7/16-inch Male JIC (37-degree flare) on one end to a 1/8-inch Male Iron Pipe (MIP) on the other, with a thread specification of 7/16-20 x 1/8-27. Rated to 2160 psi, this fitting is built from forged brass for reliable performance under pressure. The compact geometry measures 0.89 inches center-to-end x 0.78 inches center-to-end, making it well suited for tight routing in hydraulic assemblies. Licensed plumbers, hydraulic system technicians, and industrial pipefitters are the primary installers.

This elbow is intended for use in hydraulic tubing systems that incorporate copper, brass, aluminum, or steel tubing capable of being flared to the JIC 37-degree seat standard. It fits within the JIC to MIP forged elbow product family and is applicable in both mobile and stationary hydraulic circuits where a 90-degree directional change is needed between a flare-end tube connection and a pipe-thread port. The operating temperature range of -65 to 250 degrees F covers most industrial and light-duty hydraulic service environments.

Key Features

• Forged brass construction for high-pressure durability up to 2160 psi
• 7/16-inch Male JIC (37-degree flare) x 1/8-inch MIP connection configuration
• Thread specification: 7/16-20 x 1/8-27
• Wide temperature range: -65 to 250 degrees F
• Compatible with copper, brass, aluminum, and steel hydraulic tubing that can be flared
• Compact center-to-end dimensions for space-constrained installations

Compatibility

Designed for use with copper, brass, aluminum, and steel hydraulic tubing that can be flared to the JIC 37-degree flare standard, with a 1/8-inch MIP port connection on the secondary end.

Installation Notes

Installation should be performed by a qualified hydraulic technician or licensed pipefitter. Depressurize and isolate the hydraulic circuit completely before removing or installing any fittings. Apply thread sealant to the MIP pipe threads only - never apply sealant to the JIC flare seat. Inspect the tube flare for defects before assembly to ensure a leak-free metal-to-metal seal at the JIC connection.