Midland Industries 28265 Reducing 90 Deg Street Elbow Brass

Product Description

The MIDLAND INDUSTRIES 28265 is a reducing 90-degree street elbow designed for directional pipe routing in plumbing, HVAC, and gas-distribution systems. Forged from brass, it features a 1/2-inch female NPTF inlet and a 3/8-inch male NPTF outlet, allowing simultaneous pipe-size reduction and a 90-degree change in flow direction within a single fitting. Thread specifications are 1/2-14 on the female end and 3/8-18 on the male end. The fitting is rated to 1200 psi and handles temperatures from -65 to 250 degrees F. A 1-inch hex flat enables standard wrench installation. Licensed plumbers, HVAC technicians, and pipefitters are the primary installers of this type of fitting.

This street elbow is suited for residential and light commercial applications where piping transitions in tight spaces. Its compact center-to-end dimensions of 0.96 inches by 1.37 inches make it appropriate for close-clearance installations in mechanical rooms, equipment cabinets, and behind-wall rough-in work. Compatible pipe materials include brass, bronze, copper, steel, aluminum, and iron pipe, making it broadly applicable across mixed-material piping systems common in HVAC, refrigeration, and process plumbing work.

Key Features

• Forged brass construction for durability and pressure integrity
• Reduces from 1/2-inch female NPTF to 3/8-inch male NPTF in a single fitting
• 1200 psi pressure rating suitable for demanding service conditions
• Rated for -65 to 250 degrees F operating temperature range
• 1-inch hex flat accommodates standard open-end or adjustable wrenches
• Compact 0.96 x 1.37-inch center-to-end dimensions for tight-clearance installs

Compatibility

Compatible with brass, bronze, copper, steel, aluminum, and iron pipe systems using NPTF threaded connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable IPC or IFGC requirements. Shut off and depressurize the line before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape to the male threads before assembly. Do not over-torque; hand-tighten and finish with a wrench to snug without stressing the fitting body.