Midland Industries 2404L1212 Long Adapter 3/4 in Jic X Nptf

Product Description

The MIDLAND INDUSTRIES 2404L1212 is a long-pattern hydraulic adapter designed to connect 3/4-inch Male JIC (37-degree flare) threads to 3/4-inch Male NPTF (dry-seal pipe) threads. Constructed from steel, this fitting is built for high-cycle hydraulic applications where a reliable, leak-resistant connection between JIC and pipe-thread ports is required. The extended body length of the 2404-L series provides additional clearance in tight plumbing configurations, making it a practical choice when standard-length adapters cannot seat properly. Hydraulic technicians, fluid power specialists, and industrial maintenance crews typically install this type of fitting in mobile and stationary hydraulic systems.

This adapter is suited for use in hydraulic lines, power units, and fluid distribution manifolds in both mobile equipment and industrial settings. The JIC x NPTF combination is common in applications where a hydraulic circuit must transition from a flare-type port to a tapered pipe-thread port on pumps, cylinders, valves, or reservoirs. At 3.55 inches in length, the long-body design accommodates installations where port spacing or surrounding hardware demands extra reach.

Key Features

• 3/4-inch Male JIC (37-degree flare) on one end for standard hydraulic flare connections
• 3/4-inch Male NPTF dry-seal pipe thread on the opposite end for leak-free pipe port connections
• Long-pattern body at 3.55 inches overall length for clearance in congested plumbing layouts
• Steel construction for strength and durability in hydraulic service
• Part of the 2404-L Series MJIC to Male Pipe long adapter family
• Minimum order quantity of 1 - available as a single unit

Compatibility

Designed as an OEM-style replacement or direct-install fitting for hydraulic systems requiring a 3/4-inch Male JIC to 3/4-inch Male NPTF long adapter in the 2404-L series configuration.

Installation Notes

Installation should be performed by a qualified hydraulic technician or fluid power mechanic. Depressurize and drain the hydraulic circuit fully before removing or installing any fittings. NPTF threads are self-sealing by design, but inspect threads for damage and follow the system manufacturer's assembly guidelines for thread engagement. Do not overtighten; use a calibrated torque wrench and refer to the applicable industry standard for JIC and NPTF fitting assembly, such as SAE J514 or SAE J1453.