Midland Industries 21621212 Flange Pad 3/4 in Weld Code 62

Product Description

The MIDLAND INDUSTRIES 21621212 is a steel flange pad fitting from the 2162 Series, designed to connect a 3/4 inch weld end to a 3/4 inch Code 62 high-pressure flange port. This fitting serves as the interface between a welded pipe or tube end and a Code 62 four-bolt split-flange connection, a standard configuration in hydraulic systems operating at elevated pressures. Steel construction provides the durability and pressure tolerance required in demanding hydraulic circuits. Hydraulic system assemblers, pipefitters, and fluid power technicians install this type of fitting during fabrication or repair of hydraulic manifolds and piping assemblies.

The 21621212 flange pad is suited for use in industrial hydraulic systems where Code 62 flange connections are specified. Code 62 flanges are rated for higher working pressures than Code 61 equivalents, making this fitting appropriate for heavy equipment, industrial machinery, and high-pressure hydraulic power units. It is part of the 2162 Series, which covers pipe weld to Code 62 flange pad configurations in the Steel Flange Fittings category. Typical installations involve welding the fitting to a pipe or tube end, then bolting the flange pad to a mating Code 62 port using a standard four-bolt split-flange clamp set.

Key Features

• 3/4 inch weld connection on one end for direct pipe or tube attachment
• 3/4 inch Code 62 flange pad on the mating end for high-pressure four-bolt flange connections
• Steel construction for strength and compatibility with hydraulic fluid service
• Part of the 2162 Series Steel Flange Fittings line for Code 62 hydraulic applications
• Minimum order quantity of 1, available as a single unit

Compatibility

Designed as an OEM-style hydraulic flange fitting for use with standard Code 62 four-bolt split-flange systems requiring a 3/4 inch weld-end connection.

Installation Notes

Installation should be performed by a qualified hydraulic system technician or pipefitter. Depressurize and fully isolate the hydraulic circuit before removing or installing any fittings. The weld end must be properly prepared, aligned, and welded to the pipe or tube per applicable welding procedures before bolting the flange pad to the mating port. Torque the flange bolts evenly in a cross pattern to the mating component manufacturer specifications.