Midland Industries 20794C42 Right Angle Flow Control Valve

Product Description

The MIDLAND INDUSTRIES 20794C42 is a metered-out right angle flow control valve designed for precise airflow regulation in pneumatic and fluid control systems. It features a 4 mm push-to-connect inlet and a 1/8-inch male BSPT threaded outlet, allowing tool-free tube insertion on one end and a standard threaded connection on the other. The composite polyacetal body keeps weight low at 0.04 pounds while delivering a working pressure rating of 150 psi and a burst pressure of 340 psi. Internal components include a brass body, retainer, and spacer, a stainless steel gripper ring for secure tube retention, and an NBR 70 elastomer seal. This valve is installed by pneumatic technicians and industrial maintenance professionals in compressed-air and compatible fluid circuits.

This valve is suited for residential and light commercial pneumatic control applications where metered-out flow control is required at a right angle fitting point. The metered-out design regulates flow on the exhaust side of the actuator, providing smooth, controlled motion. It is commonly used in compressed-air distribution lines, automation panels, and pneumatic tool circuits where space-saving right angle routing is needed. Both air and compatible fluid media are admitted per manufacturer specification.

Key Features

• Metered-out flow control design for smooth actuator deceleration on exhaust side
• 4 mm push-to-connect x 1/8-inch male BSPT connection for quick, tool-free tube installation
• 150 psi working pressure with 340 psi burst pressure rating
• Composite polyacetal body with brass internal components and stainless steel gripper ring
• NBR 70 seal compatible with air and admitted fluid media
• Brass threads with white sealant coating for leak-resistant thread engagement
• Acetal resin tube release collar for controlled disconnection

Compatibility

Designed as an OEM-style replacement or new-installation fitting for pneumatic systems using 4 mm OD tubing with 1/8-inch BSPT threaded ports. Suitable for use in compressed-air and compatible fluid circuits where metered-out right angle flow control is specified.

Installation Notes

Installation and servicing of pneumatic fittings should be performed by qualified pneumatic or mechanical technicians. Depressurize and lock out the system before removing or installing any fitting. Thread the male BSPT end into the port using appropriate thread sealant or tape per the manufacturer recommendation, and do not overtighten composite-body fittings. Verify tube OD is 4 mm and that the system pressure does not exceed the 150 psi working pressure rating during operation.