Midland Industries 20110C Swivel Male Branch Tee Composite

Product Description

The MIDLAND INDUSTRIES 20110C is a composite swivel male branch tee designed for push-to-connect plumbing and fluid distribution systems. It features two 1/2-inch push-to-connect ports and one 3/8-inch male NPT swivel outlet, allowing a single supply line to branch into two directions while the swivel connection permits repositioning for easier installation in tight spaces. Rated to 150 psi and suitable for operating temperatures from 32 degrees F to 140 degrees F, this fitting is well-suited for potable water, compressed air, and similar low-to-medium pressure applications. Licensed plumbers and HVAC technicians are the typical installers.

The 20110C is used in residential and light commercial plumbing, refrigeration lines, and fluid control systems where a compact tee configuration is needed. The push-to-connect design speeds up installation by eliminating the need for soldering or threaded assembly on two of the three ports. The positional swivel on the 3/8-inch NPT port allows the male threaded end to be aimed at a specific angle before being locked into final position, reducing the need for offset unions or angled adapters in confined installations.

Key Features

• Two 1/2-inch push-to-connect ports for tool-free, solder-free connections
• 3/8-inch male NPT swivel outlet with positional adjustment for directional flexibility
• Composite body construction for corrosion resistance and reduced weight
• Rated to 150 psi maximum working pressure
• Operating temperature range of 32 degrees F to 140 degrees F
• 3/8-18 thread specification on the swivel NPT port

Compatibility

Designed as an OEM-style replacement or new-installation fitting for push-to-connect composite body plumbing systems using 1/2-inch tubing and 3/8-inch male NPT threaded connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified technician in accordance with applicable IPC or local plumbing codes. Shut off and depressurize the supply line completely before removing existing fittings or inserting tubing into the push-to-connect ports. Ensure tubing ends are cut cleanly and squarely and deburred before insertion to achieve a proper seal. Do not exceed the rated 150 psi working pressure or the 32 degrees F to 140 degrees F temperature range.