Midland Industries 20032 1/8 in Ptc X 1/8 in Fnpt Brass Adapter

Product Description

The MIDLAND INDUSTRIES 20032 is a straight brass push-to-connect adapter designed to transition a 1/8-inch push-to-connect tube connection to a 1/8-inch female NPT threaded port. The fitting accepts tubing with a simple push-in action, eliminating the need for ferrules, compression sleeves, or thread sealing on the push side. With a 1/8-27 NPT thread, a 0.56-inch hex, and an overall length of 0.96 inches, it is compact enough for tight installations. Rated for service between -10 and 200 degrees F, this adapter suits pneumatic, instrumentation, and light fluid-line applications commonly encountered by HVAC technicians, plumbers, and industrial maintenance trades.

This fitting is used where a push-to-connect tube line must terminate at a female NPT port on a valve body, manifold, sensor, or equipment panel. Its small 1/8-inch size makes it well suited for low-pressure pneumatic control lines, pilot lines, and instrument air circuits in both residential and light commercial systems. The all-brass construction provides good corrosion resistance in clean air and compatible fluid service environments.

Key Features

• Push-to-connect end accepts 1/8-inch OD tubing without additional hardware
• Female NPT end threads onto 1/8-27 NPT ports on valves, manifolds, and sensors
• All-brass construction for corrosion resistance and durability
• Compact 0.96-inch overall length for use in confined spaces
• 0.56-inch hex allows standard wrench installation
• Rated -10 to 200 degrees F for broad service temperature range

Compatibility

Designed as a standard OEM-style push-to-connect brass fitting for use with 1/8-inch OD tubing and 1/8-27 female NPT ported components in pneumatic and light fluid-line systems.

Installation Notes

Installation is performed by qualified HVAC technicians, plumbers, or instrumentation mechanics. Depressurize and isolate the line before disassembly or installation. Apply thread sealant or PTFE tape to the NPT threads in accordance with applicable plumbing codes; the push-to-connect end requires no sealant. Do not exceed the fitting's rated temperature or pressure limits for the intended service fluid.