Midland Industries 107066SS Threaded Flange 2.5 in 316 Ss 300 Lb

Product Description

The MIDLAND INDUSTRIES 107066SS is a 2-1/2 inch threaded flange manufactured from 316 stainless steel and rated to a 300 lb pressure class. It is designed for use in piping systems where a secure, leak-resistant flanged connection is required at a threaded pipe end. Conforming to ANSI B16.5 dimensional standards, this flange ensures consistent face dimensions and bolt-hole patterns for proper mating with standard flanged components. Plumbers, pipefitters, and industrial maintenance technicians install this type of flange in corrosive or high-moisture environments where 316 stainless steel provides the necessary chemical and oxidation resistance.

This flange is suited for residential, commercial, and light industrial piping applications involving water, steam, or corrosive media where a threaded pipe connection transitions to a flanged joint. The 300 lb pressure class rating makes it appropriate for moderate-pressure service lines. Its 316 stainless steel construction is commonly specified in marine environments, food processing facilities, chemical handling systems, and coastal installations where standard carbon steel or 304 stainless steel flanges may not provide adequate corrosion resistance.

Key Features

• 2-1/2 inch threaded connection for direct installation onto threaded pipe ends
• 316 stainless steel construction for superior corrosion resistance in harsh or corrosive environments
• 300 lb pressure class rating for moderate-pressure piping service
• Conforms to ANSI B16.5 dimensional standards for consistent bolt-hole pattern and face dimensions
• Stainless steel construction resists oxidation and is suitable for wet or marine installations

Compatibility

Designed as an OEM-style replacement or new-installation threaded flange for 2-1/2 inch nominal pipe size systems conforming to ANSI B16.5 dimensional standards at 300 lb pressure class.

Installation Notes

This flange is typically installed by licensed plumbers or pipefitters in accordance with applicable plumbing and mechanical codes. Depressurize and isolate the piping system completely before beginning installation or removal. Apply appropriate thread sealant or PTFE tape to the threaded pipe end before engagement, and tighten to the fitting manufacturer's recommended hand-tight-plus specification using a pipe wrench. Verify bolt torque on the mating flange face is applied in a cross-pattern sequence to ensure an even, leak-free gasket seal.