Mag-mate N750T Neodymium Pot Magnet 3 Lb 0.75 in

Product Description

The MAG-MATE N750T is a neodymium rare earth pot magnet designed for threaded mounting applications. It delivers an average pull force of 3 pounds from a compact 0.75-inch diameter, 0.5-inch high nickel-plated steel cup. The magnet features a 10-24 tapped hole with a 0.25-inch thread depth, allowing direct bolt or stud installation without adhesives or secondary hardware. The aluminum-insulated construction isolates the magnet from conductive surfaces where electrical separation is required. HVAC, electrical, and general mechanical technicians use this type of fastener magnet for panel retention, sensor mounting, and fixture positioning in tight spaces.

The N750T is suited for light-duty permanent or semi-permanent mounting in residential and commercial applications where a compact, high-strength magnet with a threaded interface is needed. Its nickel finish resists corrosion in typical indoor service environments. The 200 degrees F maximum operating temperature makes it compatible with HVAC equipment cabinets, electrical enclosures, and similar installations where moderate heat exposure is expected. The small form factor fits in confined spaces where larger pot magnets cannot be used.

Key Features

• 3 lb average pull force from a 0.75-inch diameter neodymium magnet
• 10-24 threaded hole with 0.25-inch tapped depth for direct fastener mounting
• Nickel-plated finish for corrosion resistance in indoor environments
• Aluminum insulation isolates magnet from conductive surfaces
• Rated to 200 degrees F maximum operating temperature
• Compact 0.5-inch height fits restricted installation spaces

Compatibility

Designed as an OEM-style threaded pot magnet for use with 10-24 fasteners in light-duty mounting applications across HVAC, electrical, and mechanical service environments.

Installation Notes

Installation requires only a 10-24 bolt or threaded stud and basic hand tools. De-energize or power down any electrical equipment before attaching or removing magnets from panels or enclosures. Keep neodymium magnets away from electronic components, magnetic storage media, and pacemaker devices during handling. Do not exceed the rated operating temperature, as sustained heat above 200 degrees F will permanently reduce magnetic strength.