Mag-mate MRA060X0050X025 Flexible Magnetic Strip 6 Lb

Product Description

The MAG-MATE MRA060X0050X025 is a flexible magnetic strip with an adhesive back, designed for light-duty holding, mounting, and labeling applications across trade and industrial environments. The strip measures 300 inches (25 feet) in length, 0.5 inches wide, and 0.0625 inches thick, making it easy to cut to any required length on the job. It delivers a maximum pull force of 6 pounds and a magnetic pull per linear foot of 3 pounds. The dark brown, rubber-magnet construction is flexible enough to conform to flat or slightly curved surfaces. Electricians, HVAC techs, and facility maintenance crews use this strip to organize tools, secure labels, and mount lightweight components without fasteners.

This magnetic strip is suited for both residential and light commercial applications. Common install scenarios include mounting signage, tool holders, display panels, and cable management clips to metal surfaces. The pressure-sensitive adhesive back bonds directly to clean, smooth substrates, eliminating the need for screws or brackets. The strip performs reliably at temperatures up to 160 degrees F, making it appropriate for use in equipment rooms, control panel areas, and general shop environments where moderate heat may be present.

Key Features

• 300 inches (25 feet) total length - field-cuttable to any required segment size
• 6 pound maximum pull force with 3 pounds of magnetic pull per linear foot
• Pressure-sensitive adhesive back for tool-free mounting to metal and other smooth surfaces
• Rated for stability up to 160 degrees F (71 degrees C)
• 0.5 inches wide by 0.0625 inches thick - low-profile and flexible
• Dark brown finish; flexible rubber-magnet construction

Compatibility

Designed for general-purpose use on any clean, flat, or lightly curved ferrous or adhesive-compatible surface. Suitable as a flexible magnetic mounting strip in HVAC, electrical, and light industrial applications.

Installation Notes

Clean the mounting surface thoroughly with isopropyl alcohol and allow it to dry completely before applying the adhesive back. Cut the strip to the desired length using sharp shears or a utility knife. Apply firm, even pressure along the full length of the strip after placement to ensure full adhesive contact. No tools or fasteners are required, but adhesive bond strength increases after a 24-hour cure period at room temperature.