M.a. Ford. 27850024B Corner Radius End Mill Head 5 Flute

Product Description

The M.A. FORD. 27850024B is a solid carbide corner radius end mill head engineered for precision milling applications in metalworking and machining environments. This single-end tool features five flutes with a right-hand cutting direction and right-hand flute direction, delivering smooth chip evacuation and consistent surface finish. The spiral flute geometry supports efficient cutting across a standard length of cut of 1.25 inches. A variable index design helps reduce harmonic vibration during aggressive cuts. Installed by machinists and CNC operators, this head is suited for finishing and semi-finishing passes where corner integrity is critical.

This end mill head is designed for use in CNC machining centers and manual milling machines where a corner radius profile is required to reduce stress concentrations at part edges. The 0.5-inch shank diameter fits standard tool holders common in production and job-shop environments. It is appropriate for ferrous and non-ferrous material removal where a controlled corner radius is specified on the finished part. Single-end configuration means the tool is indexed or replaced rather than flipped when worn.

Key Features

• Solid carbide construction for rigidity and wear resistance in demanding cuts
• 5-flute configuration for improved feed rates and surface finish
• Corner radius end type reduces edge chipping and part stress concentrations
• Variable index geometry helps dampen vibration during high-speed milling
• Right-hand spiral flutes promote upward chip evacuation
• Standard length of cut of 1.25 inches suits a wide range of depth requirements

Compatibility

Designed as an OEM-style replacement or direct-use corner radius end mill head for CNC machining centers and milling machines accepting a 0.5-inch shank diameter toolholder.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator following the machine tool manufacturer guidelines. Ensure the spindle is fully powered down and locked out before mounting or removing the end mill head. Use a properly sized collet or end mill holder torqued to the toolholder manufacturer specification. Inspect the shank and seating surface for contamination or damage before securing the tool.