M.a. Ford. 27212010 Solid Carbide Chucking Reamer 3.05 Mm

Product Description

The M.A. FORD. 27212010 is a solid carbide chucking reamer designed for precision hole finishing in machining applications. With a reamer diameter of 3.05 mm (0.1201 decimal inch), an overall length of 2.25 inches, and a flute length of 0.625 inches, this tool delivers tight dimensional control for close-tolerance bores. The 4-flute straight configuration with right-hand cut provides smooth material removal and accurate sizing. Machining professionals and toolroom technicians install this reamer in CNC or manual drill press setups where bore finish and dimensional accuracy are critical.

This chucking reamer is suited for production and toolroom use in metalworking environments where holes must be brought to precise finished dimensions after drilling. The straight shank allows direct mounting in standard chucks and collets. It carries a diameter tolerance of +0.005/+0.010 mm, placing it in the over-size category, which is appropriate for applications requiring a slightly larger finished bore to account for interference fits or press fits. No coolant-through capability is present, so external coolant or cutting fluid application is standard practice during use.

Key Features

• Solid carbide construction for rigidity and wear resistance in hard or abrasive materials
• 3.05 mm (0.1201 inch) reamer diameter with +0.005/+0.010 mm tolerance for controlled over-size finishing
• 4 straight flutes with right-hand cut for smooth, consistent material removal
• Straight shank compatible with standard drill chucks and collets
• Uncoated carbide surface suitable for a wide range of ferrous and non-ferrous materials
• Compact overall length of 2.25 inches for use in confined setups or short-reach applications

Compatibility

Designed as an OEM-style solid carbide chucking reamer for use in standard drill press, lathe, or CNC machining setups requiring a straight-shank tool in the 3.00 to 4.00 mm diameter range.

Installation Notes

Installation is performed by qualified machinists or toolroom technicians. Secure the straight shank firmly in a compatible chuck or collet before operation and verify runout is within acceptable limits prior to cutting. Power down and lock out the machine spindle before changing or inspecting the reamer. Do not use this tool to remove more material than the reaming allowance intended for the reamer diameter, as excessive stock removal will compromise bore finish and tool life.