M.a. Ford. 20417300 Solid Carbide Jobber Drill Bit

Product Description

The M.A. FORD. 20417300 is a solid carbide jobber-length drill bit ground to a No. 17 wire gauge size, equivalent to 0.1730 inches in diameter. It features a 118-degree faceted drill point and a two-flute right-hand spiral configuration designed for efficient chip evacuation and accurate hole entry. The bright, uncoated finish suits general-purpose drilling where coatings are not required. At 2.75 inches overall length with a 1.625-inch flute length, this bit fits standard drill chucks with a straight cylindrical shank of 0.1730 inches. It is installed and used by machinists, tool-and-die technicians, and maintenance professionals in production and MRO environments.

This drill bit is intended for use on a broad range of workpiece materials including cast iron, non-ferrous metals, stainless steel, and carbon and alloy steels. It is suited to both manual drill press operation and CNC drilling applications where a general-purpose carbide bit is specified. The 5xD flute-to-diameter ratio and web-thinned tapered web geometry support clean entry and reduced thrust in short-to-medium depth holes across these material categories.

Key Features

• Solid carbide construction for rigidity and wear resistance across ferrous and non-ferrous materials
• No. 17 wire size, 0.1730 inches diameter with a tight tolerance of -0.0005 to 0.0000 inches
• 118-degree faceted point for accurate self-starting and reduced walking
• Web-thinned tapered web reduces axial thrust and improves chip flow
• Bright uncoated finish suitable for general-purpose applications
• Manufactured to ISO 9001:2015 certified standards

Compatibility

Designed as a general-purpose jobber-length drill bit compatible with standard drill press, hand drill, and CNC machining center setups that accept a straight cylindrical shank of 0.1730 inches. Suitable for drilling cast iron, non-ferrous metal, stainless steel, and steel workpieces.

Installation Notes

Installation and use should be performed by qualified machinists or maintenance technicians familiar with cutting tool selection and safe machine operation. Secure the shank fully in the drill chuck and verify runout before beginning a cut. Power down or lock out the machine before changing or inspecting the bit. Do not exceed the recommended feed and speed parameters for the workpiece material and machine type.