M.a. Ford 20003120 Die Drill Bit 1/32 in Solid Carbide

Product Description

The M.A. FORD 20003120 is a straight-flute die drill bit engineered for precision holemaking in demanding materials. Built from solid carbide with an uncoated bright finish, this bit features a 135-degree split point and web-thinned geometry that reduces entry force and improves centering accuracy. It measures 0.0312 inches (1/32 inch) in diameter with a 0.188-inch flute length and a 1.5-inch overall length. The 2-flute, right-hand cutting configuration is suited for tight-tolerance work in dies, molds, and small-component drilling applications. Licensed machinists, tool and die makers, and precision fabricators are the typical end users for this series.

This drill bit is designed for holemaking in cast iron, stainless steel, steel, aluminum, alloy tool steel, austenitic stainless steel, hardened steel, high-temperature alloys, low carbon steel, and medium carbon steel. The Series 200 construction conforms to DIN standards, making it appropriate for shops holding close dimensional tolerances. It is well suited to CNC machining centers, drill presses, and precision hand drilling fixtures where small-diameter hole quality is critical.

Key Features

• Solid carbide construction for rigidity and wear resistance in hard and abrasive workpiece materials
• 135-degree split point reduces walking and lowers thrust force at entry
• Web-thinned geometry improves chip evacuation in deep or interrupted cuts
• Straight-flute design suited for brittle materials such as cast iron and hardened steel
• Right-hand cutting, 2-flute configuration compatible with standard drill chucks and collets
• Diameter tolerance of +0.0000 to -0.0005 inches supports tight-fit hole requirements

Compatibility

Designed as an OEM-style replacement and standard production drill bit for precision holemaking applications requiring a 1/32-inch solid carbide straight-flute bit conforming to DIN standards.

Installation Notes

Installation and use of this drill bit should be performed by qualified machinists or tool and die technicians familiar with small-diameter carbide tooling. Secure the shank firmly in a properly sized collet or drill chuck before operation, and verify spindle runout is within acceptable limits to avoid bit breakage at this diameter. Power down and de-energize all machine controls before changing tooling. Carbide bits are brittle — avoid side loading, interrupted cuts without appropriate feed rate adjustment, and contact with hardened surfaces during setup.