M.a. Ford. 18050000B Square End Mill 1/2 in 7 Flute Carbide

Product Description

The M.A. FORD. 18050000B is a 7-flute solid carbide square end mill designed for high-performance milling in demanding metalworking applications. Built to Series 180 standards, it features a 0.5000-inch cutting diameter, a 0.6250-inch length of cut, and a 3.0000-inch overall length with a straight cylindrical 0.5000-inch shank. The 38-degree helical flute geometry promotes efficient chip evacuation and reduced cutting forces. The ALtima Blaze finish adds heat and wear resistance, extending tool life in abrasive and high-temperature cutting conditions. This tool is intended for use by machinists and CNC operators working in production or job-shop environments.

This end mill is suited for milling steel, stainless steel, cast iron, nonferrous metals, and high-temperature alloys. Primary workpiece material codes H, K, M, P, and S are supported, covering a broad range of metals commonly encountered in aerospace, die and mold, and general machining work. The variable index design reduces chatter and harmonic vibration during side milling and slotting passes. Right-hand cut and right-hand flute orientation are standard for conventional CNC milling spindle setups.

Key Features

• 7-flute geometry increases feed rates and surface finish quality in finishing and semi-finishing cuts
• 38-degree helix angle promotes smooth cutting action and efficient chip flow
• ALtima Blaze finish provides elevated heat resistance and extended wear life
• Variable index flute spacing reduces chatter and vibration during aggressive cuts
• Solid carbide construction delivers rigidity and dimensional stability at high spindle speeds
• Right-hand cut, right-hand flute, straight cylindrical shank for standard CNC toolholder compatibility

Compatibility

Designed as an OEM-style replacement and standard tooling option for CNC machining centers and manual mills accepting a 1/2-inch straight cylindrical shank. Compatible with workpiece material codes H, K, M, P, and S as specified by the manufacturer.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Secure the shank in a properly sized collet or end mill holder, ensuring adequate engagement depth before tightening to toolholder specifications. Confirm spindle direction is set to right-hand rotation before running. This end mill is not center-cutting and should not be used for direct plunge entry into solid material.