M.a. Ford. 13818752F Square End Mill 3/16 Inch Solid Carbide

Product Description

The M.A. FORD. 13818752F is a solid carbide square end mill designed for precision milling of non-ferrous metals and similar materials. It features a 3/16-inch diameter with a 1/2-inch length of cut and a 2-inch overall length. The three-flute, helical geometry with a 36-degree helix angle promotes efficient chip evacuation and smooth cutting action. A TiB2 (titanium diboride) coating is applied to enhance surface hardness and reduce built-up edge on non-ferrous workpieces. This end mill is centercutting, allowing plunge entry, and is built to Series 138 specifications. It is a single-end tool with a straight cylindrical shank sized at 3/16 inch.

This end mill is suited for milling operations on non-ferrous metals such as aluminum, brass, and copper in both light production and toolroom environments. The right-hand cut and right-hand flute configuration is standard for conventional CNC machining centers and manual mills. The 3/16-inch diameter makes it well suited for slotting, profiling, and pocketing in smaller-scale features where tool clearance is limited. Machinists and tool-and-die professionals working on precision components will find this geometry appropriate for finish passes and moderate material removal on non-ferrous stock.

Key Features

• Solid carbide construction for rigidity and wear resistance in non-ferrous milling
• TiB2 coating reduces friction and built-up edge on aluminum and other soft non-ferrous metals
• 36-degree helical flute promotes chip flow and reduces cutting forces
• Centercutting design allows direct plunge entry without a pre-drilled hole
• Three flutes balance chip clearance with surface finish quality
• Straight cylindrical shank with h6 tolerance for consistent tool holding

Compatibility

Designed as an OEM-style Series 138 end mill for use in standard 3/16-inch collets or tool holders on CNC machining centers and manual milling machines configured for right-hand rotation.

Installation Notes

Installation should be performed by a qualified machinist following standard tool-holding procedures. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool. Use a collet or end mill holder rated for 3/16-inch shank diameter and torque the retention hardware to the tool holder manufacturer specification. Verify runout with a dial indicator after clamping to confirm proper seating before beginning a cut.