Ls Electric 1341012900 Contactor 85A 120VAC 3 Pole

Product Description

The LS ELECTRIC 1341012900 is a 3-pole magnetic contactor from the Metasol Series, rated for 85 amps and designed for switching motor loads and other high-current electrical circuits in industrial and commercial applications. The coil operates at 120 VAC at 50/60 Hz, with an inrush coil power of 240 VA and a holding coil power of 17 VA. Rated for up to 1000 volts and 37 kW of power switching capacity, this contactor is built for demanding environments where reliable, repeatable switching is required. Licensed electricians and industrial maintenance technicians are the primary installers of this device.

The 1341012900 is suited for motor control centers, commercial HVAC equipment, pump panels, compressor controls, and other three-phase or single-phase load switching applications. Its 100AF frame size, IP20 enclosure rating, and NEMA 3 rating make it appropriate for panel-mounted installations in protected indoor environments. The contactor supports auxiliary contact configurations of 2NO and 2NC, expanding its use in control circuit interlock and status feedback wiring schemes.

Key Features

• 85 A continuous current rating with 1000 V voltage rating for high-capacity load switching
• 120 VAC coil voltage at 50/60 Hz with 240 VA inrush and 17 VA holding coil power
• 3-pole, 3NO main contact configuration with auxiliary contacts (2NO and 2NC)
• DIN rail and screw mounting options for flexible panel installation
• Screw terminal connections, compatible with 8 AWG wire
• IP20 and NEMA 3 rated enclosure for protected indoor use
• Rated for 1,200 operating cycles with operating temperature range of -5 to 55 degrees C

Compatibility

Designed as an OEM-style replacement or upgrade contactor for motor control and load switching panels requiring a 3-pole, 85 A, 120 VAC coil contactor in the Metasol Series 100AF frame size.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and any applicable local codes. De-energize and lockout/tagout the panel or motor control center before installing or replacing this contactor. Verify coil voltage supply matches the 120 VAC rating before energizing. Ensure terminal connections are torqued to the panel manufacturer specifications and that wire sizing meets NEC requirements for the load being controlled.