Lps 06510 Food Grade Anti-seize Lubricant 1 Lb Brush Top

Product Description

The LPS 06510 is a food grade, metal-free anti-seize lubricant supplied in a 1 lb brush-top container. It protects threaded fasteners, fittings, and mating surfaces from seizing, galling, and corrosion across an exceptionally wide service range of -65 degrees F to 1,800 degrees F. The off-white, odorless formula carries NSF H1 registration and meets FDA Regulation 21 CFR 178.3570 for incidental food contact, making it appropriate wherever contamination risk must be controlled. Technicians in food processing, beverage, pharmaceutical, and institutional facilities rely on this compound when a traditional metallic anti-seize would disqualify a surface from service or inspection.

This lubricant suits any application where fasteners, flanges, or threaded connections are exposed to high heat, moisture, or chemical wash-down cycles. Its water-resistant, metal-free composition makes it a practical choice for stainless steel hardware in sanitary piping, heat exchanger bolting, pump assemblies, and food-processing equipment. The brush-top container allows direct, controlled application without additional tooling, reducing waste and contact time during routine maintenance and shutdowns.

Key Features

• NSF H1 registered and FDA 21 CFR 178.3570 compliant for incidental food contact
• Service temperature range of -65 degrees F to 1,800 degrees F
• Metal-free and non-metallic composition prevents contamination of food-contact surfaces
• Water-resistant formula withstands wash-down and high-humidity environments
• Odorless and off-white for use in sensitive processing environments
• Brush-top container provides direct, controlled application

Compatibility

Designed for use on threaded fasteners, flanges, and mating metal surfaces in food processing, beverage, and pharmaceutical facilities where NSF H1 and FDA incidental food contact compliance is required. Also meets MIL-PRF-907E and Canadian Food Inspection Agency standards.

Installation Notes

Apply to clean, dry fastener threads or mating surfaces before assembly. Maintenance technicians should follow facility lockout/tagout procedures and allow equipment to cool to a safe handling temperature before applying or disassembling treated hardware. Use only in quantities appropriate for the joint; excess compound should be wiped from food-contact zones. Consult applicable OSHA and facility safety data sheet guidelines, as the product is classified flammable.